Customized Permanent Rare Earth Hard Ceramic Block Ferrite Magnet

Product Description

Customized Permanent Rare Earth Hard Ceramic Block Ferrite Magnet

Product Description

Product Name	Ferrite Magnets
Demension	Customized
Coating	No coating
Shape	Disk, Block, Ball, Ring, Cylinder, Tile etc. or customized
Magnetization Direction	Thickness, Length, Axially, Diametre, Radially, Multipolar
Application	Refrigerator Magnets, Loudspeakers, Small Electric Motors, Microwave Components, High-frequency Inductors and Transformers
Packaging	Vacuum packing, Cystosepiment, Carton Box
Delivery Time	15-30 days

     
     Ferrite magnets, also called ceramic magnets, have a high level of hardness, being more fragile and sensitive
to possible beating or bending of the material in some of their handling processes. They are the most economical
magnetic solution that can be found in several applications, thanks to their properties and their low cost.
    Ferrite magnets are the cheapest in the market. Its visual appearance is of a metallic oxide of dark gray color.
They have a great resistance to corrosion and therefore, they are one of the most appropriate products for different
outdoor applications thanks to being stainless. They can also be exposed to temperatures of up to 250ºC. They are
probably the best alternative to neodymium magnets, as they not only resist humidity and corrosion, but are also
resistant to different types of chemicals.
   The working temperature is a factor to be taken into account in the different uses that will be given to the magnet.
We can offer our customers a wide range of magnets that cover temperatures from -40ºC to 250ºC.

Production Process
    To obtain the ferrite magnet, first, it must undergo different phases of the production process, in this way to ensure its
quality; The process begins in obtaining the ferrite by heating a mixture of different metal oxides at high temperatures.
Once the ferrite is obtained, the product is ground into very small particles, so that each molecule has only one magnetic
domain. The powder is pressed with a concrete shape and dry, in this way smaller and geometric shapes are achieved.

Next, the material obtained is subjected to sintering, in a situation with oxygen shortage. To avoid that the pieces stick with
each other in the oven, we proceed to install some sheets that will make separators. This process is very important since it
directly influences the magnetic properties of the ferrite and can cause cracks, bubbles and some deformation.

Characteristics
Hard Ferrite magnetic performance table

Card number	The main magnetic				SJ/T10410-2016
	Br (T)	HCB (kA/m)	HCJ (kA/m)	(BH)max(KJ/m3)	Corresponding to the grade
	Br (KGs)	HCB (KOe)	HCJ (KOe)	(BH)max(MGOe)
FS-9/21	0.2-0.235	125-160	210-280	6.5-9.5	Y8T
	2-2.35	1.6-2.0	2.6-3.5	0.8-1.2
FS-28/14	0.36-0.4	135-170	140-200	22.5-28.0	Y25
	3.6-4.0	1.7-2.1	1.8-2.5	2.8-3.5
FS-28/22	0.36-0.39	200-250	225-255	23.0-28.0	Y26H-1
	3.6-3.9	2.5-3.1	2.8-3.2	2.9-3.5
FS-30/18	0.37-0.4	175-210	180-220	26.0-30.0	Y28
	3.7-4.0	2.2-2.6	2.3-2.8	3.3-3.8
FS-30/25	0.38-0.40	240-260	250-280	27.0-30.0	Y28H-1
	3.8-4.0	3.0-3.3	3.1-3.5	3.4-3.8
FS-28/38	0.36-0.38	271-295	382-405	26.0-28.5	Y28H-2
	3.6-3.8	3.4-3.7	4.8-5.1	3.3-3.6
FS-31/23	0.38-0.4	230-275	235-290	27.0-31.5	Y30H-1
	3.8-4.0	2.9-3.5	3.0-3.6	3.4-4.0
FS-32/31	0.395-0.415	275-300	310-335	27.0-32.0	Y30H-2
	3.95-4.15	3.5-3.8	3.9-4.2	3.4-4.0
FS-33/16	0.4-0.42	160-190	165-195	30.0-33.5	Y32
	4.0-4.2	2.0-2.4	2.1-2.4	3.8-4.2
FS-35/23	0.4-0.42	190-230	230-250	31.5-35.0	Y32H-1
	4-4.2	2.4-2.9	2.9-3.1	4.0-4.4
FS-34/23	0.4-0.44	224-240	230-250	31.0-34.0	Y32H-2
	4-4.4	2.8-3.0	2.9-3.1	3.9-4.3
FS-35/22	0.41-0.43	220-250	225-255	31.5-35.0	Y33
	4.1-4.3	2.8-3.1	2.8-3.2	4.0-4.4
FS-35/25	0.41-0.43	250-270	250-275	31.5-35.0	Y33H
	4.1-4.3	3.1-3.4	3.1-3.5	4.0-4.4
FS-35/30	0.41-0.43	285-315	305-335	31.8-35.0	Y33H-2
	4.1-4.3	3.6-4.0	3.8-4.2	4.0-4.4
FS-36/26	0.42-0.44	250-280	260-290	32.5-36.0	Y34
	4.2-4.4	3.1-3.5	3.3-3.6	4.1-4.5
FS-38/24	0.43-0.45	230-260	240-270	33.1-38.2	Y35
	4.3-4.5	2.9-3.3	3.0-3.4	4.2-4.8
FS-38/26	0.43-0.45	260-290	265-295	35.1-38.3	Y36
	4.3-4.5	3.3-3.6	3.3-3.7	4.4-4.8
FS-40/29	0.44-0.46	285-315	295-325	36.6-40.6	Y38
	4.4-4.6	3.6-4.0	3.7-4.1	4.6-5.1
FS-41/32	0.44-0.46	315-345	320-350	37.6-41.6	Y40
	4.4-4.6	4.0-4.3	4.0-4.4	4.7-5.2
FS-42/25	0.45-0.47	245-275	255-285	38-42	Y41
	4.5-4.7	3.1-3.5	3.2-3.6	4.8-5.3
FS-42/38	0.45-0.47	315-345	385-415	38.5-42.5	Y41H
	4.5-4.7	4.0-4.3	4.8-5.2	4.8-5.3
FS-44/35	0.46-0.48	315-335	355-385	40.0-44.0	Y42
	4.6-4.8	4.0-4.2	4.5-4.8	5.0-5.5
FS-44/40	0.46-0.48	325-345	400-440	40.0-44.0	Y42H
	4.6-4.8	4.1-4.3	5.0-5.5	5.0-5.5
FS-45/35	0.465-0.485	330-350	350-390	40.5-45.5	Y43
	4.65-4.85	4.1-4.4	4.4-4.9	5.1-5.7

Standard Sizes

Details 

Application 
Ferrite magnets are not as strong as neodymium magnets, but their resistance to corrosion and a wider temperature
range offer a large number of applications for our customers.

 FAQ
Q: How to get prompt quotation?
A: Kindly offer us your requirements about magnet grade,  size, quantity, coating, magnetic direction, work tempreture ect.. Then best price will be offered during 24 hours.
Q: How long is your lead time?
A: Generally it is 5-10 days if the goods or materials are in stock. or it is 30-35 days for new production, it is according to the order quantity.
Q: What's your MOQ ?
A: We have no strict MOQ , if we can do , we will try our best to cooperate. If any questions as small quantity , we will be open to communicate with you for better solution. 
Q: What is your terms of payment ?
A: Payment<=5000USD, 100% in advance. Payment>=5000USD, 30% T/T in advance ,balance before shippment.